KYOCERA FS-1020MFP Printer/ How to reset Developing Section

1.Insert the power plug and turn the power switch on.

2.Make sure the processing indicator and the attention indicator are turned on,press and hold both Quite Mode and Mode Select key for more than 5 seconds.

-perform the above while the front cover is opened

3.When the processing indicator has turned on,turn Power Off by pressing the power switch.

4.Close the front cover

5.When power is turned on by pressing the power key ,setting are activated

– During Activation, Processing and Attention are is up,it will take approximately 10 Minutes.

-Do not turn Power Off during activation.

6.Activaton is finished when Attention is lit or flashing.